The painting & decorating division of Hampstead Renovations020 7101 3168

Streets and squares

Joinery painting in Queen's Gate Mews

Joinery in Queen's Gate Mews is the carriage door and the sash, at a scale of two storeys. The draft praises vertically boarded carriage doors where they survive, and the mews chapter describes pairs of double timber doors, painted and side hung, often on large cast-iron Collinge hinges. Windows are sliding timber sashes in plain brick reveals with cambered arched heads. Less traditional doors and windows have already done harm. This page is about painting the timber that still answers that description.

Sources: Royal Borough of Kensington and Chelsea, Queen's Gate Conservation Area Appraisal (consultation draft)

Boarded doors are a set of joints

A vertically boarded carriage door moves at every board. Paint that bridges the joints cracks in a ladder pattern and holds water. We brush with the board, keep the joint free enough to move, and prime bare wood where an old film has left the arris. Pairs of double doors mean four edges at the meeting, plus the head. The meeting stile is the part that weathers. It is scheduled, not forgotten under 'the door'. Side-hung leaves need room. In a cul-de-sac we paint the outside face in an order that lets the leaf close, because the lane is the only way through. A door left open across a sett is a barrier. We agree which leaf can be worked and when the other stays shut.

Sources: Royal Borough of Kensington and Chelsea, Queen's Gate Conservation Area Appraisal (consultation draft)

Collinge hinges are part of the character

Large cast-iron Collinge hinges are the ironmongery the mews chapter bothers to name. They are often proud of the door, with a strap you can see from down the lane. Paint should not turn the strap into a lump. Loose paint on the iron is taken back. Sound paint can stay. Bare iron is primed with a metal primer, not with the timber undercoat, and the finish is one that suits exterior iron. If you want the hinge black and the door a different colour, that is two lines, masked. If you want them one colour, we still keep the edge of the strap sharp so the hinge reads. Painting the hinge solid to the board, so it looks like a shadow, is the loss of a detail. We oil the pivot if it is dry, enough that the leaf still swings. We do not claim a mechanical overhaul.

Sources: Royal Borough of Kensington and Chelsea, Queen's Gate Conservation Area Appraisal (consultation draft)

Sashes under a cambered brick head

The head of the opening is a camber in plain brick. The sash is rectangular timber inside that arch, or it follows the camber, and we paint what is there rather than forcing a shape. There is no decorative surround. The staff bead and the brick reveal meet on a line that everyone sees, because the lane is narrow. A wavy cut is the whole of the defect. Glazing bars, where the sash still has them, are knife-cleaned of loose paint only. Putty is renewed where it has failed. Cords are checked before we paint a sash that someone needs to open onto the lane. Upper sashes on a two-storey house are reachable from a short tower. If that tower is on the highway, approval is written down first. The sash is not painted from a ladder leant on a cambered arch.

Sources: Royal Borough of Kensington and Chelsea, Queen's Gate Conservation Area Appraisal (consultation draft); RBKC: highway licences for temporary structures

What we will not paint as joinery

Replacement garage doors and windows in less traditional materials have harmed the appearance. They are outside a timber specification. We will not grain a metal door, and we will not coat a plastic window as if it were the sliding sash in a brick reveal. Too many house-like windows is itself listed as a harm to mews character. If your front has one surviving boarded door and one later sheet, the quotation names both and includes only the timber. Adding mouldings to make the sheet look panelled is joinery alteration, not decoration, and it pushes the mews towards the house-like look the draft warns against.

Sources: Royal Borough of Kensington and Chelsea, Queen's Gate Conservation Area Appraisal (consultation draft)

Lead paint on old doors and sashes

Doors and sashes of this age were repeatedly painted when lead pigments were still widely used, into the 1960s. Sound paint stays. Flaking, chipping and dusting paint is the part that comes off. Blow lamps and gas torches are not used. Dry sanding a carriage door is a large dusty job and it is one of the higher-risk ways to disturb old lead paint, so we do not do it. The lane is a shared space. Dust is kept on the sheet, not brushed into the setts. Neighbours' thresholds are covered if we are working at the meeting of two houses. The result is a clean keyed surface, not a door taken back to new timber.

Sources: HSE, Construction hazardous substances: Lead; HSE, Old lead paint: what you need to know as a busy builder (CIS79)

The joinery quotation in this lane

Each leaf of a pair, the hinges as metal, each sash, and the reveals only if the wall coating is a separate instruction. A bare brick wall is not thrown in because we were cutting in the sash. No prices and no durations. The visit confirms boarded timber versus a later door, and cambered timber versus a replacement window. You receive a written list.

Sources: Royal Borough of Kensington and Chelsea, Queen's Gate Conservation Area Appraisal (consultation draft)

Questions about Joinery painting in Queen's Gate Mews

What is a Collinge hinge doing in the specification?

The mews chapter says ground-floor doors were often hung on large cast-iron Collinge hinges. They are visible iron on a painted timber door, so they are finished as metal and kept readable.

Are the sashes surrounded by stucco?

They sit in plain brick reveals with cambered arched heads. The paint line is against brick, which is why the cut has nowhere to hide.

Can both carriage doors be painted on the same day?

Often they should not be, because a pair standing open blocks a cul-de-sac. The sequence keeps one leaf usable. The quotation does not promise a same-day pair.

Pages to read with this one

A South Kensington enquiry

What would you
like to change?

Start with the property address and the part of your home that needs decoration. Tell us what is there now and what you would like the work to achieve.

Your decorating enquiry

Outline the rooms, existing finishes and arrangements for access.

Read our privacy policy about how we handle your enquiry.