The painting & decorating division of Hampstead Renovations020 7101 3168

Property & preparation

Preparing a stucco or brick front for repainting in a conservation area

A front in these conservation areas is rarely one material. Gault or stock brick sits beside stucco dressings, or an entire terrace is stucco that was either always painted or originally left bare. Preparation is the decision about which of those faces is already coated, which must stay bare, and how little of the sound old film needs to be disturbed.

Sources: Royal Borough of Kensington and Chelsea, Queen's Gate Conservation Area Appraisal (consultation draft); Royal Borough of Kensington and Chelsea, Thurloe Estate and Smith's Charity Conservation Area Appraisal; Historic England, Listed Building Consent (Historic England Advice Note 16); HSE, Construction hazardous substances: Lead

Name the substrate before you name the coating

Walk the elevation and write down what is actually there. On Thurloe Square the upper floors are gault brick and the ground floor is channelled stucco, unlike the earlier terraces. On Pelham Crescent the terraces are stucco and are described as painted the same colour. On Elvaston Place the wall is gault with stucco dressings, and the wider group of cliffs was originally unpainted. In Queen's Gate Mews the wall is London stock in Flemish bond. Many mews buildings are now painted. The mews were originally unpainted. Channelled and rusticated stucco holds failure in the grooves. Smooth stucco on a canted bay shows a hollow in raking light. Brick that still shows its bond is not a tired coat of cream. The list you want before any product is discussed is: already painted stucco, bare stucco, already painted brick, bare brick, stone or terracotta, and timber or metal that will be masked. Stone and terracotta belong to the limited palette of the Queen's Gate area and are not recruited into the paint.

Photograph each material, including the neighbour

Include the junction where brick meets stucco and enough of the next house to show whether the group is one colour, as at Pelham, or a contrast, as with the plain brick rebuilds that sit beside surviving stucco elsewhere. A close view of a crack and a wide view of the storey are both useful. Do not decide from a single sunlit bay.

Mark bare faces as exclusions

If the brick, the mews stock or a cliff that was originally unpainted is still bare, write it out of the paint schedule before anyone prices a whole elevation. Painting a currently unpainted surface is likely to need listed building consent where listing applies. That is a different proposal from washing a film that is already there.

Sources: Royal Borough of Kensington and Chelsea, Thurloe Estate and Smith's Charity Conservation Area Appraisal; Royal Borough of Kensington and Chelsea, Queen's Gate Conservation Area Appraisal (consultation draft)

Wash what is sound and cut back only what has failed

Household paint widely used lead pigments until the 1960s, so old external films are treated as if they may contain lead until you know otherwise. The practical rule we follow is the one in the official guidance: leave sound old paint, and take off only what is flaking, chipping or dusting. A whole-front strip to bare stucco is not a default, both because of that guidance and because earlier schemes can sit in the layers. Blow lamps and gas torches are not used to soften the film. Dry sanding across a facade is avoided. The sequence on a sound painted wall is a wash to remove chalk and dirt, a scrape of the loose edges, a filler brought flush on the bare patches, and a primer on those patches only. Channelled stucco needs the groove cleaned out or the new film will telegraph the old crack. Lattice and wave strings, where a street has them, are brushed so the pattern is not filled. A thick film is how detailing gets lost, and the Queen's Gate draft says loss of detailing can spoil a terrace's proportions.

Test for hollow render before you fill

Tap stucco at porches, string courses, bay corners and under balconies. A hollow that sounds empty is a repair to report, not a dent to skim. Filling over a moving face stores up a crack in the new coating. If the cause is damp rather than a knock, the paint specification waits on that cause being understood.

Prime bare patches, not the whole wall by habit

Bare stucco and bare timber drink the first coat. A primer is for those spots and for any filler. Sound existing paint usually needs a clean, keyed surface rather than another full primer. Say in the quotation which faces are primed and which are finished over the old film.

Sources: HSE, Construction hazardous substances: Lead; Royal Borough of Kensington and Chelsea, Queen's Gate Conservation Area Appraisal (consultation draft)

Brick is cleaned only with great reluctance, and often not at all

The Queen's Gate draft warns that cleaning brick buildings can harm their appearance, because the fabric can be damaged and the patina of age lost. That warning covers a wish to 'brighten' bare stock or gault before deciding whether to paint it. Washing painted stucco is not brick cleaning. Abrasive cleaning, high-pressure washing that opens the joint, and chemical cleans that etch the face are outside ordinary redecoration. Where brick is already painted, the film is maintained as a film: loose edges cut back, bare patches primed, colour kept off the neighbouring bare pier. Flemish bond that is still visible in a mews is a reason to stop, not a texture to coat so the lane matches. Cromwell Mews and Thurloe Place Mews are described as unpainted because that was the intention. We treat that sentence as the default unless your own wall is already coated.

Sources: Royal Borough of Kensington and Chelsea, Queen's Gate Conservation Area Appraisal (consultation draft); Royal Borough of Kensington and Chelsea, Thurloe Estate and Smith's Charity Conservation Area Appraisal

Breathable systems, solvents, and the finish you already have

Lime render and stucco can need a coating that lets moisture through. Historic England's redecorating advice is why we do not assume a hard impervious film is an upgrade. The right system depends on the substrate and on what is already stuck to it. Solvent limits for paints are set by product category, including coatings for exterior walls of masonry, brick or stucco. That is a product rule, not a recommendation of a brand, and we do not treat it as a colour choice. Like-for-like redecoration of an already painted surface usually does not need listed building consent. Changing the finish, matt to gloss or the reverse, usually does. Creams and whites are the recorded range on the large stucco terraces. They are the context for a sample, judged on the wall in daylight beside the neighbour, not a code that replaces consent.

Sample on the elevation, in the light it will live in

A card in a hallway will not tell you whether a cream sits with the next house in Pelham's shared colour or with the white stucco of a well-maintained estate front. Put the sample on the material that will be coated. Do not put it on bare brick to see what paint would look like.

Write the sheen down

If the existing film is matt and the proposal is gloss, stop and treat that as a consent question on a listed building. The quotation should name the finish in words the owner can compare with what is there now.

Sources: Historic England: redecorating a historic house; The Volatile Organic Compounds in Paints, Varnishes and Vehicle Refinishing Products Regulations 2012, Schedule 1; Historic England, Listed Building Consent (Historic England Advice Note 16); Royal Borough of Kensington and Chelsea, Queen's Gate Conservation Area Appraisal (consultation draft)

Masking, sequence and the edges that get spoiled

Paint migrates at every junction the appraisals care about: studs on a door, bottles in a balustrade, a cambered brick head around a sash, a gault pier beside a stucco bay. Mask or cut those edges before the wall colour goes on. The usual order on an occupied house is to agree access, protect paths and planting, complete the dusty preparation, then coat from the top of the agreed face downward so later washing does not streak finished work. Doors and gates that people use are sequenced so they can close. A highway scaffold or tower is a licence, not a detail of the paint system. Nothing in this guide is a price or a duration. It is the order of decisions we expect to see in a written specification after someone has stood in front of the house.

Sources: Royal Borough of Kensington and Chelsea, Queen's Gate Conservation Area Appraisal (consultation draft); RBKC: highway licences for temporary structures

Questions this guide answers

Should old paint be taken off before a conservation-area recoat?

Sound old paint is left. Only flaking, chipping or dusting material is removed. Lead pigments were widely used until the 1960s, and blow lamps, gas torches and widespread dry sanding are avoided.

Can bare brick be painted so the terrace matches?

That is a new coating, not preparation. Several local fronts and the mews are described as originally unpainted. Painting a currently unpainted surface is likely to need listed building consent where the building is listed.

Is brick cleaning part of preparation?

The Queen's Gate draft says cleaning brick can damage the fabric and lose the patina of age. Washing a painted stucco film is a different operation and does not justify cleaning bare brick.

Pages to read with this one

A South Kensington enquiry

What would you
like to change?

Start with the property address and the part of your home that needs decoration. Tell us what is there now and what you would like the work to achieve.

Your decorating enquiry

Outline the rooms, existing finishes and arrangements for access.

Read our privacy policy about how we handle your enquiry.