Streets and squares
Painting and decorating in Egerton Crescent and Egerton Terrace
Egerton Crescent and Egerton Terrace were designed by Basevi and strongly resemble his earlier houses in Pelham Crescent and Pelham Place. They were built between 1843-50 by Bonnin or his sons, as a grand design around a curved communal garden. The crescent houses are fully stuccoed, three storeys plus attic and half basement, and larger and taller than the Pelham houses. What distinguishes them from Basevi's earlier work is in the detail, and the detail is where the decorating decisions sit.
Egerton Crescent and Terrace across South Kensington (SW7)
A curve with emphasis at measured points
Houses at the centre and ends of the crescent, and a quarter and three quarters of the way around it, have accentuated designs that project outwards with blocked quoins. The projecting houses have triple windows with individual railings at first floor, and stuccoed attic storeys rather than mansards. So there are two kinds of house in the crescent and they are distributed at fixed intervals around the curve. If your address is one of the accentuated ones you have blocked quoins, a triple window with its own railing panel, and a stuccoed attic rather than a mansard. If it is not, you have a flatter elevation and a mansard above the parapet. Those are different quantities of work and different access requirements, and a quotation that averages them helps nobody. The house number placed on the curve is the first thing we establish.
Fully stuccoed, including the flanks you can see
The Egerton Crescent houses have fully stuccoed frontages, and the appraisal adds that the side elevations in this area are fully stuccoed where they are visible from the street. That second point is the one most often missed. The crescent was designed to stand alone, with triangular spaces between it and the two short terraces flanking it east and west, which means several elevations here are properly visible from the side as well as the front. A fully stuccoed flank is painted masonry that belongs in the schedule, not a return that gets a coat if there is time. We walk the triangular gaps on the survey, photograph the flanks, and state in the quotation which side elevations are included. Where a flank is partly screened by planting, we say how much of it is reachable and what the limit is.
Pilasters, flat walls and the discipline of a plain elevation
First floor pilasters have squared anthemion capitals, the elevations are flat with no bays, and the porches do not project. That combination is unusual in this neighbourhood and it changes the job. With no bays and no projecting porches, there is very little relief to break up the wall, so the quality of the finish is judged on the flatness and evenness of a large plain surface. Lap marks, patch repairs showing through and uneven film build are all more visible here than on a bayed and bracketed elevation. Against that plainness, the squared anthemion capitals at first floor are the one piece of carved ornament on the upper wall, and they hold paint in their undercuts. We keep the film thin on the capitals and brush them out, and we work the plain wall in continuous runs so that joins fall at natural breaks rather than mid-elevation.
Railings with acanthus tops, and why they are a separate trade
The windows match those in Pelham Crescent, but the balcony railings have an unusual design: the Egerton Crescent balcony railings are straight uprights topped with naturalistic acanthus leaves. A naturalistic leaf cast in iron is a small, deeply modelled object repeated along a whole run. It is the element on this elevation that suffers most from being painted generously, because the modelling is what makes it naturalistic in the first place. Railings are prepared as metal rather than as masonry: taken back to a sound edge, primed as metal, and finished so the leaf tops still read individually from the garden. The projecting houses also have individual railings to their first-floor triple windows, which are separate panels rather than part of a continuous run, so they are counted separately in the quotation.
Doors, and the one that is different
Most doors are the two-panelled early nineteenth century design, and there is one studded door. In Egerton Terrace, some original two-panel doors survive. A two-panel door of this date is a plain, generously proportioned leaf with deep stiles and a simple moulding, and the thing that spoils it is a build of paint that rounds the panel edges and softens the bead. We treat an original two-panel door as a conservation item: thin coats, the mouldings brushed out rather than flooded, and ironmongery masked or removed and refitted rather than coated over. The single studded door is a distinct feature and is identified by number on the survey rather than assumed, because studs lose their shape very quickly under heavy coats and need the smallest brush on the elevation.
Egerton Terrace, which is four different building types
Egerton Terrace has a villa pair at nos. 23-25, a detached house at no. 6 and two terraces, all fully stuccoed with Georgian paned sashes, shallow porches and mansard additions above the parapet line. One of those terraces is only two storeys. So within one short street there is a semi-detached pair, a detached house, a two-storey terrace and a taller terrace, all sharing a material and a window type but nothing else. The shared features are useful: fully stuccoed walls, Georgian paned sashes with their glazing bars, shallow porches and a mansard above the parapet. The differences decide the access and the quantities. A detached house has four elevations to consider. A two-storey terrace needs far less apparatus than its neighbour. We survey the building type before the street name.
Garden, consent and what drives the cost
No prices are published here. The crescent is set around a curved communal garden, so the standing place for access may be pavement or garden, and the garden is not ours to occupy: that agreement rests with whoever controls it, and planting is protected. If a structure stands on the public highway the borough's written approval comes first. The cost variables are whether your house is one of the accentuated ones with blocked quoins and a triple window, whether a visible flank is in scope, the length of acanthus-topped railing, whether the door is an original two-panel leaf, and whether there is a mansard or a stuccoed attic above the parapet. Ordinary painting of a house does not need planning permission, with listed buildings and Article 4 areas as the exceptions to check.
Sources: Royal Borough of Kensington and Chelsea, Thurloe Estate and Smith's Charity Conservation Area Appraisal; RBKC: highway licences for temporary structures; Planning Portal, External walls: planning permission; RBKC: Article 4 directions in conservation areas
Questions about Egerton Crescent and Terrace
Who designed Egerton Crescent, and when was it built?
Basevi designed it, and it was built between 1843-50 by Bonnin or his sons as a grand design around a curved communal garden. It strongly resembles his earlier houses in Pelham Crescent and Pelham Place.
Why do some houses project from the curve?
Houses at the centre and ends of the crescent, and a quarter and three quarters of the way around it, have accentuated designs that project outwards with blocked quoins, triple first-floor windows with individual railings, and stuccoed attic storeys rather than mansards.
What is unusual about the railings here?
The balcony railings are straight uprights topped with naturalistic acanthus leaves, which the appraisal describes as an unusual design even though the windows match those in Pelham Crescent.
Are the side elevations painted too?
Yes, where they can be seen. The appraisal records that the side elevations in this area are fully stuccoed where they are visible from the street, and the crescent stands alone with triangular spaces to the flanking terraces.
Pages to read with this one
Adjoining streets and wider work
Wider notes on the buildings of South Kensington sit with Hampstead Renovations.
A South Kensington enquiry
What would you
like to change?
Start with the property address and the part of your home that needs decoration. Tell us what is there now and what you would like the work to achieve.
Your decorating enquiry
Outline the rooms, existing finishes and arrangements for access.